Silicon Optix 50HD Benutzerhandbuch
Chapter 2 – Connections
9
C
ONNECTIONS
Computer/Input 1
The computer port enables you to connect your computer to the projector using a
standard 15-pin D-sub VGA cable.
standard 15-pin D-sub VGA cable.
DVI input/Input 1
The projector supports connection to a DVI (Digital Visual Interface), which enables
you to connect any device with DVI-D (Digital Only) output.
you to connect any device with DVI-D (Digital Only) output.
RS-232
The standard RS-232 port enables you to connect the projector to a PC and upgrade
the projector firmware through a PC or control the projector using RS232 com-
mands. See Appendix E for more information about RS232 controls.
the projector firmware through a PC or control the projector using RS232 com-
mands. See Appendix E for more information about RS232 controls.
Note: The firmware upgrade is located on the CD that came bundled with
the projector. Contact your dealer for information on future upgrades.
the projector. Contact your dealer for information on future upgrades.
Component/ Input 2 & 3
The projector supports two component video devices (Input 2&3). Component video
is typically transmitted in either YPbPr/YCbCr or RGB (Red/Green/Blue) formats.
Component video connections provide the best picture quality and are preferable to
S-Video and Composite Video connections.
is typically transmitted in either YPbPr/YCbCr or RGB (Red/Green/Blue) formats.
Component video connections provide the best picture quality and are preferable to
S-Video and Composite Video connections.
Note: The PbPc/YCbCr color model is used for encoding video. Pb/Cb is
the luminosity of the black and white signal. Pb/Cb and Pr/Cr are color
difference signals. Pb/Cb is blue minus Y (B-Y), and Pr/Cr is red minus Y
(R-Y). The Premiere 50HD DLP Projector provides three standard RCA
phono plugs (x 2) to support YPbPc/YCbCr component video output.
the luminosity of the black and white signal. Pb/Cb and Pr/Cr are color
difference signals. Pb/Cb is blue minus Y (B-Y), and Pr/Cr is red minus Y
(R-Y). The Premiere 50HD DLP Projector provides three standard RCA
phono plugs (x 2) to support YPbPc/YCbCr component video output.
S-Video/Input 4
Connect a DVD, VCR, or DTV decoder source device with the S-Video cable to this
socket. S-video separates pictures into chrominance and luminance signals provid-
ing a high quality image that is preferable to a composite video connection.
socket. S-video separates pictures into chrominance and luminance signals provid-
ing a high quality image that is preferable to a composite video connection.
Composite Video/Input 4
Connect a DVD, VCR, or DTV decoder source device to this socket.