Siemens TC100 Benutzerhandbuch

Siemens AG
I IA CE EDM
Frauenauracher Strasse 98
D-91056 Erlangen
Germany

©

 Siemens AG 2010

Technical data subject to change.

This manual contains information that must be observed to ensure your personal safety and to prevent 
property damage. The notices referring to your personal safety are highlighted in the manual by a safety 
alert symbol, notices referring to property damage only, have no safety alert symbol. Depending on the 
hazard level, warnings are displayed in descending order as follows:.

In the event of a number of levels of danger prevailing simultaneously, the warning corresponding to the 
highest level of danger is always used. A warning with a warning triangle indicating risk of physical injury 
may also include a warning of the risk of damage to property.

The associated device/system may only be installed and used in conjunction with this documentation. 
Only qualified personnel should be allowed to commission and operate the device/system. For the pur-
pose of the safety information in this documentation, a “qualified person” is someone who is authorized to  
energize, ground, and tag equipment, systems, and circuits in accordance with established safety 
procedures.

Please note the following:

All designations with the trademark symbol ® are registered trademarks of Siemens AG. Other designa-
tions in this documentation may be trademarks whose use by third parties for their own purposes can vio-
late the rights of the owner.

We have checked that the contents of this publication agree with the hardware and software described 
here. Nevertheless, we cannot assume responsibility for any deviations that may arise. The information 
given in this publication is reviewed at regular intervals and any corrections that might be necessary are 
made in the subsequent editions.

indicates that death or serious injury will result if proper precautions are not taken.

indicates that death or serious injury may result if proper precautions are not taken.

with a warning triangle indicates that minor personal injury can result if proper precautions are not taken.

without a warning triangle means that material damage can occur if the appropriate precautions are not 
aken.

means an undesirable result or state can occur if the corresponding instruction is not followed.

This equipment is only allowed to be used for the applications described in the catalog and in the technical 
description, and only in conjunction with non-Siemens equipment and components recommended by 
Siemens. Correct transport, storage, installation and assembly, as well as careful operation and maintenance, 
are required to ensure that the product operates safely and without faults.