Siemens TC63 Benutzerhandbuch

s

TC63_ATC_V00.490

Page 114 of 501

5/24/05

Confidential / Draft - Do not copy

The 

 command can be used to find out whether the ME is waiting for a password and, if so, how many

attempts are left to enter the password.

The execute command returns the number of attempts still available for entering the currently required password,

for example the PIN, PUK, PH-SIM PUK etc. 

The read command 

? indicates which password the number of attempts stated by the execute com-

mand actually refers to. Also, the write command may be used to query the counter for a specific password: It

indicates the number of attempts still available for entering the password identified by 

, for example

the PIN, PIN2, PH-SIM PIN etc.

To check whether or not you need to enter a password use the read commands 

?, 

? and

?. If the response to 

? is "READY" the counter of the execute command 

. If the responses to 

? and 

? both read "READY", no password is

currently required, and the referrer of the execute command 

 is explicitly undefined. 

Number of attempts left to enter the currently required password. This number will be counted down after each

failure.

Test Command

AT^SPIC=?

Response(s)

OK

Read Command

AT^SPIC?

Response(s)

OK

Exec Command

AT^SPIC

Response(s)

OK

Write Command

Response(s)

OK

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

SIEMENS

!

%

%

%

%

%

%

!

%

!

<counter>

(num)