Siemens TC63 Benutzerhandbuch

s

TC63_ATC_V00.490

Page 147 of 501

5/24/05

Confidential / Draft - Do not copy

This command searches the active phonebook for a given string 

 and dials the assigned phone number.

The termination character ";" is mandatory since dialing from a phonebook is only supported for voice calls and

for sending *# codes of Supplementary Services or other functions. 

String type value ("x"), which should equal an alphanumeric field in at least one phonebook entry in the searched

memories; used character set should be the one selected with 

 can contain escape sequences

as described in chapter "

 must be wrapped in quotation marks (""), if escape sequences or parameter 

 are used or if the

alphanumeric strings contains a blank. If not, quotation marks are optional.

 is set to "UCS2", with respect to the coding of UCS2-characters only phonebook entries that contain

an alphanumeric string with as size less than the half of the parameter 

 can be

dialed. 

String of GSM modifiers:

I     Activates CLIR (disables presentation of own phone number to called party)

i     Deactivates CLIR (enables presentation of own phone number to called party)

• This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking. 

• The command is not applicable to data calls. Any attempt to dial 

 without semicolon ";" causes the

result code "NO CARRIER" to appear.

• Parameter 

 only if no *# code is within the dialing string.

Exec Command

ATD>

[

Response(s)

ERROR

+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

V.250

%

%

§

%

%

§

§

!

!

!

<str>

(str)(+CSCS)

<mgsm>

(str)