Siemens TC63 Benutzerhandbuch
TC63 AT Command Set
17.5 AT+CPBW
s
TC63_ATC_V00.490
Page 398 of 501
5/24/05
Confidential / Draft - Do not copy
17.5
AT+CPBW Write into Phonebook
The
write command can be used to create, edit and delete a phonebook entry at a
the active storage selected with
.
If
="FD" (SIM fixed dialing numbers) is selected, PIN2 authentication has to be performed prior to
any write access.
The
test command returns the location range supported by the current storage, the maximum length
of the
field, the range of supported
values and the maximum length of the
field.
Note: The length may not be available while SIM storage is selected. If storage does not offer format information,
the format list contains empty parenthesizes.
Syntax
Parameter Description
Location number within phonebook memory. The maximum range supported by each storage type is indicated
in the test command response. If
is not given, the first free entry will be used.
If
is given as the only parameter, the phonebook entry specified by
is deleted.
Phone number in format specified by
. Parameter must be present, although it may be an empty string.
Alphabetic characters are not permitted.
may contain dialstring modifiers "*", "#" or "+".
If other printable non-alphabetic characters are used the entry needs to be saved with
=209. Otherwise,
=209 is not used any non-digit characters other than "*", "#" or "+" will be removed from the string and
only accepted modifiers from the GSM alphabet will be saved.
=209 requires double memory. In order to fit into a standard location, the num-
ber needs to be reduced to a maximum length of
/2, including all digits and dial string modifiers.
Extended locations may be used as stated below for
.
Test Command
AT+CPBW=?
Response(s)
+CPBW:
(1-
),
, (list of supported
OK
ERROR
+CME ERROR
Write Command
AT+CPBW=
[
][,
[[,
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 04.08
%
%
%
%
%
%
%
!
%
!
<location>
(num)
<number>
(str)