Siemens TC63 Benutzerhandbuch

s

TC63_ATC_V00.490

Page 72 of 501

5/24/05

Confidential / Draft - Do not copy

 URC 1

Format of the standard indicator:

+CIEV: 

Value related to an indicator has changed. 

 URC 2

Format of the "adnread" indicator issued when accessing the ADN phonebook records stored on the SIM:

+CIEV: 

, 

, 

+CIEV: 

One URC is issued for every used Abbreviated Dialing Number (ADN) phonebook record. After the last record

of the ADN phonebook was read, a URC with "READY" tag signals end of processing. 

 URC 3

Format of the Voice Message indicator, if the number of waiting messages is delivered by the network: 

+CIEV: 

If the number of waiting messages is not delivered the standard indicator applies. 

 URC 4

Format of the "eons" indicator: 

+CIEV: 

One URC is issued for each new LAI (Location Area Information) broadcast by the network. 

 URC 5

Format of the "nitz" indicator: 

+CIEV: 

, 

String values and their 

 ranges.

All indicators supported by 

 are accessible with this command, too. A detailed description of these indi-

cators can be found there.

The following indicators are accessible via 

 only: 

“audio“

Activity of the built-in audio unit. 

“vmwait1“

Voice Message Waiting Indication for line 1

"vmwait1" and "vmwait2" indicate the receipt of a special short message with

a Voice Message Waiting Indicator. The service must be provisioned by the

operator. 

The numbers 1 or 2 in "vmwait1" and "vmwait2" are related to the two lines of

the Alternate Line Service (ALS), also defined in CPHS Phase 2 standard. For

further details refer to the 

 command. 

The presentation mode of the indicator varies with the operator: If more than

one message are waiting, some operators only indicate the first one, others

deliver the indicator each time a new voice message is put into the mailbox.

<indDescr>

(str)

0

Audio unit not active.

1

Value 1 means for example:

Outgoing voice call: Indicator appears when dialing starts.

Incoming voice call: Indicator appears prior to the RING result code.

0

The value 0 notifies that no new voice message is available, and is pro-

vided by the service center to clear the voice message indication after 

the subscriber has retrieved all voice messages. 

1

The value 1 notifies the subscriber that the mailbox contains one or 

several messages.