Siemens sitrans LU01 Benutzerhandbuch
©
Siemens Milltronics Process Instruments Inc. 2008
Safety Guidelines:
Warning notices must be observed to ensure personal safety as well as that of
others, and to protect the product and the connected equipment. These warning notices are
accompanied by a clarification of the level of caution to be observed.
accompanied by a clarification of the level of caution to be observed.
Qualified Personnel:
This device/system may only be set up and operated in conjunction with this
manual. Qualified personnel are only authorized to install and operate this equipment in accordance with
established safety practices and standards.
established safety practices and standards.
Unit Repair and Excluded Liability:
•
The user is responsible for all changes and repairs made to the device by the user or the user’s
agent.
agent.
•
All new components are to be provided by Siemens Milltronics Process Instruments Inc.
•
Restrict repair to faulty components only.
•
Do not reuse faulty components.
Warning:
This product can only function properly and safely if it is correctly transported, stored,
installed, set up, operated, and maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area
may cause interference to several frequency based communications.
may cause interference to several frequency based communications.
Note:
Always use product in accordance with specifications.
Copyright Siemens Milltronics Process
Instruments Inc. 2008. All Rights Reserved
Instruments Inc. 2008. All Rights Reserved
Disclaimer of Liability
This document is available in bound version and in
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic versions
as designed and authored by Siemens Milltronics Process
Instruments Inc. Siemens Milltronics Process Instruments
Inc. will not be responsible for the contents of partial or
whole reproductions of either bound or electronic
versions.
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic versions
as designed and authored by Siemens Milltronics Process
Instruments Inc. Siemens Milltronics Process Instruments
Inc. will not be responsible for the contents of partial or
whole reproductions of either bound or electronic
versions.
While we have verified the contents of this
manual for agreement with the
instrumentation described, variations
remain possible. Thus we cannot
guarantee full agreement. The contents of
this manual are regularly reviewed and
corrections are included in subsequent
editions. We welcome all suggestions for
improvement.
Technical data subject to change.
manual for agreement with the
instrumentation described, variations
remain possible. Thus we cannot
guarantee full agreement. The contents of
this manual are regularly reviewed and
corrections are included in subsequent
editions. We welcome all suggestions for
improvement.
Technical data subject to change.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.
Contact SMPI Technical Publications
Contact SMPI Technical Publications
European Authorized Representative
at the following address:
Technical
Publications
Siemens
AG
Siemens Milltronics Process Instruments Inc.
Industry Sector
1954 Technology Drive, P.O. Box 4225
76181 Karlsruhe
Peterborough, Ontario, Canada, K9J 7B1
Deutschland
Email: techpubs.smpi@siemens.com
•
•
For a selection of Siemens Milltronics level measurement manuals, go to:
www. siemens.com/processautomation
www. siemens.com/processautomation
. Under Process Instrumentation, select
Level
Measurement
and then go to the manual archive listed under the product family.
•
For a selection of Siemens Milltronics weighing manuals, go to:
www. siemens.com/processautomation
www. siemens.com/processautomation
. Under Weighing Technology, select
Continuous
Weighing Systems
and then go to the manual archive listed under the product family.