Sears Blower 138.74899 Benutzerhandbuch

9 - English

This product requires assembly


  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 

are included.

WARNING: This new product has been shipped 

in a partially assembled condition as described 

below.  Carefully  check  the  packing  list  below 

to ensure all items are included in the package; 

the  packing  list  describes  all  loose  items  that 

are  not  assembled  to  the  product  as  shipped. 

Do  not  operate  the  product  if  any  packing  list 

items  are  already  assembled  to  your  product 

when  you  unpack  it.  Call  the  customer  service 

number  below  for  assistance.  Operation  of  a 

product  that  may  have  been  improperly  preas -

sembled could result in serious personal injury.

 

Inspect  the  product  carefully  to  make  sure  no 

breakage  or  damage  occurred  during  shipping.

 

Do not discard the packing material until you have care -

fully inspected and satisfactorily operated the product.

 

If  any  parts  are  damaged  or  missing,  please  call 

1-888-266-7096 for assistance.

If any parts are damaged or missing, do 

not operate this product until the parts are replaced. 

Failure to heed this warning could result in serious 

personal injury.

WARNING: 

Do not attempt to modify this product 

or create accessories not recommended for use with 

this product. Any such alteration or modification is 

misuse and could result in a hazardous condition 

leading to possible serious personal injury.

Do not connect to power supply until 

assembly is complete. Failure to comply could result 

in  accidental starting and possible serious personal 

injury.

See Figure 3, page i and ii.

Electric blower
Blower tube
Mulcher tubes
Bag
Operator’s Manual

1. Slide the front and rear mulcher tubes together until the 

lock button engages. (See fig 3)

2. Pull the lock button forward to disengage the gate. Hold 

the gate open. (See fig 3.1)

3. Insert the “wedged” end clip of the mulcher tube into 

the rear clip. (See fig 3.2). Push the “hooked” end clip of 

the mulcher tube into the front clip. (See fig 3.3). Press 

the lock button back to engage the mulcher tube. (See fig 

3.4)

4. To remove mulcher tubes, follow the steps (3) (2) (1).

5. Insert the bag adaptor into the blower outlet. Lock the 

bag adaptor with the lock button. To remove the bag, 

simply press lock button and remove bag. (see Fig.5).

It may be necessary to remove the blower tube or 

mulcher tubes to clear a blocked tube or impeller.

             

                             To prevent serious personal injury, 

make sure the switch is in the OFF position, it is 

unplugged, and the impellers have stopped before 

attaching or removing tubes.

See Figure 4 page i and ii.

1. Slide blower tube forward until the notched areas on 

the blower housing click into the slots on the tube. 

2. Insert the concentrator nozzle onto the regular nozzle 

to lock. (Concentrator nozzle is used to increase air flow 

in tight areas: flower beds. under decks, etc.).

See Figure 5 page i and ii.

While standing in the operating position adjust the length 

to fit the operator’s size. Pull the tab to lengthen, pull the 

strap to shorten.

NOTE: Blower will not run until gate is closed and locked.