Sapphire Audio DV425TR Benutzerhandbuch

02/01                                                                                     Page 10                                                                               250-5533

KIT CONTENTS:  Rear vent grill; .096 NG orifice; 

.059 LP orifice; Rear Vent Cover Plate, Top Grill 

Cover Plate

TOOLS REQUIRED:  Power drill; #2 Phillips bit; 5/32" 

Allen wrench; 5/8" open end wrench; high-temp sili-

cone sealant (optional.)

STEP A:  Convert to Rear Vent:

A-1 - At the REAR of stove:

1.  Remove rear access plate on back shield and 

discard. See Fig. 1

2.  Remove rear outer flue cover plate, (with damper 

adjustment plate attached), ensure that gaskets 

and grommet stay in place.

3.  Remove inner flue cover plate; set aside.

A-2 - At the TOP of stove, with exceptions noted:

4.  Lift out cast insert piece on top.

5.  Remove outer flue collar and set aside.  See 

Fig. 3  Ensure that gasket is intact, if not, high 

temperature silicone can be used as an alterna-

tive to gasket replacement in step 12 below.

6.  Lift out inner flue collar with damper in place. See 

Fig. 4