Ryobi Cordless Saw P523 Benutzerhandbuch

5 - English

Length of Stroke ........................................................... 1 in.
Strokes Per Minute ..................... 1,100-3,000 s/min. (SPM)

Cutting Angle ................................0° to 45° (Left and Right)
Orbital Motion ......................................................4 Settings

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
or with damaged or missing parts could result in serious 
personal injury.

Do not attempt to modify this product or create 
accessories or attachments not recommended for use 
with this product. Any such alteration or modification is 
misuse and could result in a hazardous condition leading 
to possible serious personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

Do not allow familiarity with this product to make you 
careless. Remember that a careless fraction of a second 
is sufficient to inflict serious injury.

Always remove battery pack from the tool when you are 
assembling parts, making adjustments, cleaning, or when 
not in use. Removing battery pack will prevent accidental 
starting that could cause serious personal injury.

Always wear eye protection with side shields marked to 
comply with ANSI Z87.1.Failure to do so could result in 
objects being thrown into your eyes and other possible 
serious injuries.

Do not use any attachments or accessories not 
recommended by the manufacturer of this product. The 
use of attachments or accessories not recommended 
can result in serious personal injury.

You may use this product for the purposes listed below:


  Cutting wood surfaces, thin sheet metal, plastics, and 

laminates

See Figure 1, page 9.
The lock-on button is convenient when cutting for extended 
periods of time. It is located on the handle above the switch 
trigger. 


 

To turn the saw on: Depress the switch trigger. 



 

To turn the saw off: Release the switch trigger. 



 

To lock on: Depress the switch trigger. Push in and hold 
the lock-on button. Release the switch trigger. 



 

To release: Depress the switch trigger. 

See Figure 2, page 9.
To install: 


  Place the battery pack on the tool.



  Make sure the latches on each side of the battery pack 

snap into place and the battery pack is secured on the 
tool before beginning operation.

To remove:


  Depress the latches on the sides of the battery pack.



  Remove the battery pack.

Battery products are always in operating condition.  
Removing battery pack will prevent accidental starting 
that could cause serious personal injury.