Ricoh R3111x Series Benutzerhandbuch

R3111x SERIES 

 

NO.EA-056-080131 

 

 

1 

The R3111x series are CMOS-based voltage detector ICs with high detector threshold accuracy and ultra-low 

supply current, which can be operated at an extremely low voltage and is used for system reset as an example. 

Each of these ICs consists of a voltage reference unit, a comparator, resistors for detector threshold setting, 

an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy internally and does 
not require any adjustment. 

Three output types, Nch open drain “L” type, Nch open drain “H” type and CMOS type are available. 
The R3111x Series are operable at a lower voltage than that for the Rx5VL series, and can be driven by a 

single battery. 

Six types of packages, TO-92, SOT-89, SOT-23-3, SOT-23-5, SC-82AB, and SON1612-6 are available. 
 

•  Supply Current ......................................................................Typ. 0.8µA (−V

DET

=1.5V, V

DD

=−V

DET

−0.1V) 

•  Range of Operating Voltage Range......................................0.7V to 10.0V (T

opt

=25°C) 

•  Detector Threshold Range....................................................0.9V to 6.0V 
•  Accuracy Detector Threshold................................................±2.0% 
•  Temperature-Drift Coefficient of Detector Threshold ............Typ. ±100ppm/°C 
•  Output Types.........................................................................Nch Open Drain “L”, Nch Open Drain “H”, and 
 CMOS 
•  Packages ..............................................................................TO-92, SOT-89, SOT-23-3, SOT-23-5, 
  

SC-82AB, 

SON1612-6 

 

•  CPU and Logic Circuit Reset 
•  Battery Checker 
•  Window Comparator 
•  Wave Shaping Circuit 
•  Battery Back-up Circuit 
•  Power Failure Detector