Ricoh IS300e Benutzerhandbuch
Setting Up the Scanner
30
2
Connecting to a Network
This section explains how to connect
this machine to a network.
this machine to a network.
Important
❒ Use a 100BASE-TX (category 5) or
10BASE-T network cable when
you connect this machine to a net-
work.
you connect this machine to a net-
work.
AAAA
With the network cable you use
for connection, create a single
loop about 15cm (6”)(
for connection, create a single
loop about 15cm (6”)(
A
A
A
A) away
from an end of the cable, and then
attach the ferrite core that comes
with this machine as illustrated
below.
attach the ferrite core that comes
with this machine as illustrated
below.
Note
❒ Skip this step when you use this
machine in North America.
BBBB
Insert the network cable’s end
that has the ferrite core into the
network interface connector of
this machine.
that has the ferrite core into the
network interface connector of
this machine.
Note
❒ When you use this machine in
North America, insert an end of
the network cable into the net-
work interface connector of this
machine.
the network cable into the net-
work interface connector of this
machine.
CCCC
Insert the other end of the net-
work cable into an appropriate
connector of a network device,
such as an Ethernet hub.
work cable into an appropriate
connector of a network device,
such as an Ethernet hub.
ADG004S