Ricoh A12 Benutzerhandbuch
[Flash Shut Spd Lim]
Use to limit the shutter speed to lower speeds while the flash is being used
in order to prevent camera shake. Select from [Auto], [1/2], [1/4], [1/8],
[1/15], [1/30], [1/60], or [1/125]. The shutter speed will not drop below the
set speed while the flash is being used.
in order to prevent camera shake. Select from [Auto], [1/2], [1/4], [1/8],
[1/15], [1/30], [1/60], or [1/125]. The shutter speed will not drop below the
set speed while the flash is being used.
Note --------------------------------------------------------------------------------------
• The maximum shutter speed setting that works with the flash is 1/180
sec. The flash cannot be used with shutter speeds faster than this setting.
The shutter speed will not be faster than 1/180 sec. while the flash is
being used. This applies to external flashes, as well.
The shutter speed will not be faster than 1/180 sec. while the flash is
being used. This applies to external flashes, as well.
• This setting is invalid when using slow-sync flash.