Ricoh A16 Benutzerhandbuch

•  If the flash (GF-1) is fired using DISP. in [Manual], the white balance will be 

set to the metering results calculated when the flash went off. 

 [Auto], [Auto-Hi], [ISO-LO], [ISO 200] to [ISO 3200] can be selected.

•  [ISO-LO] is equivalent to ISO 100. However, the dynamic range gets 

narrower and the higher brightness levels make whiteout more likely to 
occur.

•  When [Auto] is selected and the flash is used, the sensitivity used will gain 

up to ISO 800 equivalent.

•  The step setting for ISO can be selected in [ISO Step Setting] (GP. 38) in 

the setup menu.

•  When [Auto] is selected and the flash is not used, the minimum and 

maximum values for the ISO sensitivity will be ISO 200 and ISO 400.