Ricoh CAPLIOG4 Benutzerhandbuch

Seite von 190
Appendices
185
H. Error Messages
If an error message is displayed on the LCD Monitor, take the corresponding action.
Error Message
Cause and Action
Page
INSERT CARD
No card is loaded. Insert a card.
SET DATE
The date is not set. Set the date.
FILE NUMBER OVER
The file number limit has been exceeded. Please use another card, or
delete unwanted files.
UNMATCHED FILE
A file that cannot be played back was selected.
-
INSUFFICCIENT MEMORY. CONTINUE?
Because there is not sufficient capacity on the card, all the files cannot be
copied. Use another card.
PROTECTED
You are trying to delete a protected file.
WRITE-PROTECTED
The card is "Locked (write-protection)". Unlock the card.
PRINT SETTINGS CANNOT BE SET FOR THIS FILE.
This file (movies and other) cannot be selected for printing.
-
INSUFFICIENT MEMORY
Files cannot be stored. Make sure there is enough free space, or delete
files.
The image print number limit has been exceeded. Select an image and set
the number to 0.
FORMAT INTERNAL MEMORY
It is necessary to format internal memory.
FORMAT CARD
The card is not formatted. Format the card.
CARD ERROR
Please reformat. If, after doing so, the error message still appears, the
card may be faulty. Do not use the card.
WRITE TO CARD
Writing file to memory. Wait until writing finishes.
-
NO FILE
There are no files that can be played back.
-
CANNOT RECORD
The Number of remaining shots is 0. Switch to another card or internal
memory.