RGB Spectrum Quadra Benutzerhandbuch
C O M M A N D L I N E I N T E R F A C E
Command Summary
350-7951
Quadra User’s Guide
72
.
. .
.
.
SERIAL PORT
. . . . . . . . .
COMMANDS
Serial Port Commands are used to control the baud and echo settings. A
summary is listed below. Click the desired command to access detailed
instructions.
summary is listed below. Click the desired command to access detailed
instructions.
Refer to the “
” section for a complete
description of all serial port commands.
S E R I A L P O R T C O M M A N D S D E S C R I P T I O N S
The table below lists all serial port commands, their arguments and detailed
descriptions.
descriptions.
Table 4-10.
Serial Port Commands Summary
Command
Description
Sets the serial port baud rate.
Turns the serial echo On/Off.
Sets the flow control mode.
Table 4-11.
Serial Port Commands Descriptions
Command
Arguments
Description
BAUDrate
[9600 | 19200 | 38400 |
57600 | 115200]
57600 | 115200]
Sets the serial port baud rate. The value is
automatically saved in NVRAM.
automatically saved in NVRAM.
Default:
9600
ECHO
[ON | OFF]
Turns the serial echo On/Off. The value is saved
in the NVRAM. The
in the NVRAM. The
echo
is only present on
commands typed and sent to the unit from the
serial port. There is no echo on a Telnet
connection.
serial port. There is no echo on a Telnet
connection.
Note: The
Echo
setting has no effect on
responses issued by the
Quadra
; responses are
always visible, regardless of the
echo
status.
Default:
ON
HANDShaking
[HW | SW]
Sets the flow control mode for the serial port.
•
The HW option provides hardware
handshaking.
handshaking.
•
The SW option provides for software
XON/XOFF flow control.
XON/XOFF flow control.