RGB Spectrum Digital Recording and Streaming System DGy 201x Benutzerhandbuch

Seite von 158
C O M M A N D   L I N E   I N T E R F A C E
Commands
350-9047 v3.0.1
DGy Model 201x User’s Guide
103
. . . . .
PLAYLOOP
<ON | OFF>
This command modifies the behavior of 
PLAY
. If 
PLAYLOOP
 is 
OFF
 then 
PLAY
 plays its clip (or 
list of clips) once, then stops. If 
PLAYLOOP
 is 
ON
PLAY
 plays the listed clip(s) in a loop until 
STOP
 is 
issued.
Default: OFF
SYNChronizedSTATus 
(none)
Lists information about any queued synchronized 
command. Se
 and 
.
PLAYSPeeD
[-100.0 ... 100.0 ]
This command sets the DGy 201x play speed. 
PLAYSPeeD = 1.0 represents normal speed in the 
forward direction.
Positive PLAYSPeeD values represent playback in 
the forward direction.
To play in fast forward use a positive value of 
PLAYSPeeD greater than 1.0.
To play in slow motion, use a positive value 
between 1.0 and 0.0.
Negative PLAYSPeeD values represent playback in 
reverse.
To play in fast reverse use a negative value greater 
than -1.0
To play in slow reverse use a negative value 
between -1.0. and 0.0.
Example
: Set the play speed for 8 times normal in 
the reverse direction.
PLAYSPD -8.0
Example
: Set the play speed for 1/10 normal 
speed in the forward direction.
PLAYSPD 0.1
Default: 1.0
PAUSE 
(none)
In Play mode, this command pauses playback. 
Playback resumes when the 
Play
 command is 
sent. 
In Record mode, this command pauses record. 
Record resumes when the 
Record
 command is 
sent.
NextCLIP
(none)
Cues the DGy from the currently playing clip to the 
beginning of the next recorded clip. Works in Play 
or Pause modes.
PrevCLIP
(none)
Moves the DGy from the currently playing clip to the 
beginning of the previously recorded clip, then cues. 
Works in Play or Pause modes.
Table 6-6  
DGy 201x Play and Record Commands (Continued)
Command
Arguments
Description