RGB Spectrum Digital Recording and Streaming System DGy 201x Benutzerhandbuch

. . . . .

. . . . . . . . . 

The table below lists DGy 201x streaming commands.

StreamFragmentSTATus

(none)

Returns the current state of multicast streaming by 
displaying either ON or OFF for both the 

 and 

 functions. 

(none)

Initiates the incoming multicast stream to be 
received, decoded, and viewed on the client DGy 
201x decoder. To begin subscribing to a multicast 
stream, first set the 

 and 

[ddd.ddd.ddd.ddd]

Sets or displays the incoming multicast stream IP 
address.

To determine the current multicast stream IP 
address without changing it, use the command 
without an argument.

Default: 225.0.0.37

<5001...65535>

Sets or displays the incoming multicast stream 
transmission port.

To determine the current port without changing it, 
use the command without an argument.

Default: 6000

(none)

Stops the incoming multicast stream.

(none)

Initiates the outgoing multicast stream transmission 
from the server DGy 201x.

[ddd.ddd.ddd.ddd]

Sets or displays the outgoing multicast stream IP 
address.

To determine the current IP address without chang-
ing it, use the command without an argument.

Default: 225.0.0.37

<5001...65535>

Sets or displays the outgoing multicast stream 
transmission port.

To determine the current port without changing it, 
use the command without an argument.

Default port setting: 6000

(none)

Stops the outgoing multicast stream transmission.

RECordFrameRate

<0 .. 100>

When streaming, this must be set to 0 to allow the 
DGy to automatically calculate the maximum rate.

Default: 0