Psion Teklogix 9160 G2 Benutzerhandbuch

8.3.3  Viewing Last Proposed Set Of Changes

The Last Proposed Set of Channel Changes shows the last channel plan. The plan 
lists all access points in the cluster by IP Address, and shows the current and pro-
posed channels for each AP. Locked channels will not be re-assigned and the 
optimization of channel distribution among APs will take into account the fact that 
locked APs must remain on their current channels. APs that are not “Locked” may 
be assigned to different channels than they were previously using, depending on the 
results of the plan.

8.3.4  Configuring Advanced Settings (Customizing And Scheduling 

Channel Plans)

If you use Channel Management as provided (without updating Advanced Settings), 
channels are automatically fine-tuned once every hour if interference can be reduced 
by 25 percent or more. Channels will be re-assigned even if the network is busy. The 
appropriate channel sets will be used (‘b/g’ for APs using IEEE 802.11b/g and ‘a’ 
for APs using IEEE 802.11a).

These defaults are designed to satisfy most scenarios where you would need to 
implement channel management.

You can use Advanced Settings to modify the interference reduction potential that 
triggers channel re-assignment, change the schedule for automatic updates, and re-
configure the channel set used for assignments.

Specifies the IP Address for the access point.

Indicates the radio channel on which this access point is currently broadcasting.

Indicates the radio channel to which this access point would be re-assigned if the Channel Plan is exe-
cuted.

Table 8.4 AP’s Channel Plan