Psion Teklogix 9160 G2 Benutzerhandbuch

12.1.5  Configuring Guest Interface Ethernet (Wired) Settings

To configure Ethernet (Wired) Settings for the “Guest” interface, fill in the fields as 
described below.

12.1.6  Updating Settings

To update Ethernet settings:

1.

Navigate to the Ethernet Settings page.

2.

Configure the ethernet settings as required.

3.

Click the Update button to apply the changes.

Enter the Default Gateway in the text boxes.

The Domain Name Service (DNS) is a system that resolves the descriptive name (domainname) 
of a network resource (for example, www.psionteklogix.com) to its numeric IP address (for 
example, 

66.93.138.219

). A DNS server is called a Nameserver.

There are usually two Nameservers; a Primary Nameserver and a Secondary Nameserver.

You can choose Dynamic or Manual mode.

• If you choose Dynamic, the IP addresses for the DNS servers will be assigned 

automatically via DHCP. (This option is only available if you specified DHCP for the 
Connection Type.)

• If you choose Manual, you should assign static IP addresses manually.

Shows the MAC address for the Guest interface for the Ethernet port on this access point. This is a 
read-only field that you cannot change.

If you choose to configure Internal and Guest networks by “VLANs”, this field will be enabled.

Provide a number between 1 and 4094 for the Guest VLAN.

Shows the subnetwork address for the Guest interface. For example, 

192.168.1.0

.

Table 12.5 Configuring Guest Interface Ethernet Settings

Table 12.4 Ethernet Settings For Internal LAN