Psion Teklogix 9160 G2 Benutzerhandbuch

Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
Configuring Static WEP Security On A Client

C-10

Psion Teklogix 9160 G2 Wireless Gateway User Manual

. . . then configure WEP security on each client as follows.

Network Authentication

Open or Shared, depending on how you configured this option on the access point.

Note: When the Authentication Algorithm on the access point is set to Both,

clients set to either Shared or Open can associate with the AP. Clients con-
figured to use WEP in Shared mode must have a valid WEP key in order to
associate with the AP. Clients configured to use WEP as an Open system
can associate with the AP even without a valid WEP key (but a valid key will
be required to actually view and exchange data). For more information, see
Online Help on the access point.

Data Encryption

WEP

Network Key

Provide the WEP key you entered on the access point Security settings in the Transfer Key
Index position.

For example, if the Transfer Key Index on the access point is set to 1, then for the client Net-
work Key specify the WEP Key you entered as WEP Key 1 on the access point.

Key Index

Set key index to indicate which of the WEP keys specified on the access point Security page
will be used to transfer data from the client back to the access point.

For example, you can set this to 1, 2, 3, or 4 if you have all four WEP keys configured on the
access point.

Table C.2 Association Settings

Choose WEP as the
Data Encryption mode

Enter a network key that matches
the WEP key on the access point

Choose Open or Shared

in the position set to the transfer key index
(and re-type to confirm)

Optionally set a different transfer key index
to send data from client back to access point

Disable auto key option