Psion Teklogix 9160 G2 Benutzerhandbuch
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP
WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP
C-20
Psion Teklogix 9160 G2 Wireless Gateway User Manual
C.7.1 WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP
The Built-In Authentication Server on the 9160 G2 Wireless Gateway uses Pro-
tected Extensible Authentication Protocol (EAP) known as “EAP/PEAP”.
tected Extensible Authentication Protocol (EAP) known as “EAP/PEAP”.
•
If you are using the Built-in Authentication server with “WPA/WPA2
Enterprise (RADIUS)” security mode on the 9160 G2 Wireless Gateway,
then you will need to set up wireless clients to use PEAP.
Enterprise (RADIUS)” security mode on the 9160 G2 Wireless Gateway,
then you will need to set up wireless clients to use PEAP.
•
Additionally, you may have an external RADIUS server that uses
EAP/PEAP. If so, you will need to:
EAP/PEAP. If so, you will need to:
(1) Add the 9160 G2 Wireless Gateway to the list of RADIUS server cli-
ents.
ents.
AND
(2) Configure your “WPA/WPA2 Enterprise (RADIUS)” wireless clients to
use PEAP.
use PEAP.
Note:
The following example assumes you are using the Built-in Authentication
server that comes with the 9160 G2 Wireless Gateway. If you are setting
up EAP/PEAP on a client of an AP that is using an external RADIUS
server, the client configuration process will differ somewhat from this
example especially with regard to certificate validation.
server that comes with the 9160 G2 Wireless Gateway. If you are setting
up EAP/PEAP on a client of an AP that is using an external RADIUS
server, the client configuration process will differ somewhat from this
example especially with regard to certificate validation.