Psion Teklogix 9160 G2 Benutzerhandbuch

D.2  Cluster Recovery

In cases where the access points in a cluster become out of sync or an access point 
cannot join or be removed from a cluster, the following methods for cluster recovery 
are recommended.

D.2.1  Reboot Or Reset Access Point

These recovery methods are given in the order you should try them. In all but the 
last case (stop clustering), you only need to reset or reboot the particular access 
point whose configuration is out of sync with other cluster members or cannot 
remove/join the cluster.

•

Physically reboot the access point by cycling the power (pressing the 
Power button Off, then On).

•

Reset the access point from its Administration UI. To do this, go to 

http://IPAddressOfAccessPoint

, navigate to Reset Configuration, and click the 

Reset button. (IP addresses for APs are on the Cluster > Access Points 
page for any cluster member.)