Proxim AP-4000 Benutzerhandbuch

Seite von 235
Command Line Interface (CLI)
AP-4000 Series User Guide
Parameter Tables
192
§ When the AP-4900M is configured to use the 4.9 GHz Public Safety operational mode, antenna diversity is disabled, and antenna 3 is stati-
cally configured for use. If an operational mode other than 4.9 Public Safety is configured, antenna diversity is configurable by the administra-
tor.
** WDS and Mesh technologies have been designed for outdoor use.  Each 802.11 packet is acknowledged by the receiving station. On links 
longer than about 100m, the time that it takes for the ACK to get back to the sending station is long enough to cause the sending station to 
believe that the packet was not properly received. This problem can be corrected by adjusting  the AP Link Length parameter to a value that 
is larger than the length in meters of the longest link being serviced by that AP.
802.11a Only Parameters
* Super mode must be enabled on the wireless interface before Turbo mode can be enabled. Turbo mode and Mesh mode (either Mesh AP or 
Mesh Portal) can not be enabled on the same interface simultaneously.
Mini
25
-70
53
-42
Micro
33
-62
59
-36
Name
Type
Value
Access
CLI Parameter
Operating Frequency 
Channel
Integer
Varies by regulatory 
domain and country. See 
RW
channel
Supported Data Rates
Octet String
See Transmit Rate, 
below
R
suppdatarates
Transmit Rate
Integer32
0 (Auto Fallback; default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW
txrate
Physical Layer Type
Integer
ofdm (orthogonal 
frequency division 
multiplexing) for 802.11a
R
phytype
Super Mode
Integer
enable
disable (default)
RW
supermode
Turbo Mode*
Integer
enable
disable (default)
RW
turbo
Distance Between 
APs
Receive Sensitivity Threshold
Transmit Defer Threshold
Value
dBm
Value
dBm