Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Proxim
  4. AP-4000
  5. Benutzerhandbuch

Proxim AP-4000 Benutzerhandbuch

Download
Seite von 235
Command Line Interface (CLI)
AP-4000 Series User Guide
Parameter Tables
205
Syslog Parameters
The following parameters configure the Syslog settings.
NOTE: When Heartbeat is enabled, the AP periodically sends a message to the Syslog server to indicate that it is active. 
The frequency with which the heartbeat message is sent depends upon the setting of the Heartbeat Interval.
Syslog Host Table
The table described below configures the Syslog hosts that will receive message from the AP. You can configure up to ten 
Syslog hosts.
Name
Type
Value
Access
CLI Parameter
Syslog
Group
N/A
R
syslog
Syslog Status
Integer
enable
disable (default)
RW
syslogstatus
Syslog Port
Octet String
514
R
syslogport
Syslog Lowest Priority 
Logged
Integer
1 - 7
1 = LOG_ALERT
2 = LOG_CRIT
3 = LOG_ERR
4 = LOG_WARNING
5 = LOG_NOTICE
6 = LOG_INFO (default)
7 = LOG_DEBUG
RW
syslogpritolog
Heartbeat Status
Integer
enable (1)
disable (2) (default)
RW
sysloghbstatus
Heartbeat Interval 
(seconds)
Integer
1 - 604800 seconds;
900 sec. (default)
RW
sysloghbinterval
Name
Type
Value
Access
CLI Parameter
Syslog Host Table
Table
N/A
R
sysloghosttbl
Table Index
Integer
1 - 10
N/A
index
IP Address
IpAddress
User Defined
RW
ipaddr
Comment (optional)
DisplayString
User Defined
RW
cmt
Status (optional)
Integer
enable
disable
delete
RW
status