Proxim AP-4000 Benutzerhandbuch

Interfaces

• Enable the transmission and reception of frames on that wireless interface
• Enable the associated BSS port on that interface
• Start the AP services to wireless clients
• Indicate the wireless service resume status of the wireless interface through LED and traps

After wireless service resumes, the AP resumes beaconing, transmitting and receiving frames to/from the wireless 
interface and bridging the frames between the Ethernet and the wireless interface. 

The following traps are generated during wireless service shutdown and resume, and are also sent to any configured 
Syslog server.

When the wireless service is shut down on a wireless interface, the AP generates a trap called 
oriTrapWirelessServiceShutdown.

When the wireless service is resumed on a wireless interface, the AP generate a trap called 
oriTrapWirelessServiceResumed.

The Channel Blacklist table contains all available channels (channels vary based on regulatory domain). It can be used to 
manually blacklist channels, and it also reflects channels that have been automatically blacklisted by the 

 function. In the ETSI (Europe) and TELEC (Japan) regulatory domains, 

channels are blacklisted automatically when radar is detected; when a channel has been automatically blacklisted, the 
Radar Detected status is set to True, and the channel will remain remain blacklisted for 30 minutes. Additionally, an 
administrator can blacklist channels manually to prevent their being used when ACS is enabled. To blacklist a channel 
manually:

1. Click on Configure > Interfaces > Wireless A or Wireless B.
2. Scroll down to the Channel Blacklist heading.

3. Click Edit in the Channel Blacklist Table