PROLINK Huricane 9200/S Benutzerhandbuch
Hurricane 9200/S ADSL Ethernet Router User’s Guide
174
The diagnostics feature executes a series of test of your system
software and hardware connections. Use this feature when working
with your ISP to troubleshoot problems.
Follow these instructions to begin the diagnostics program:
1. Log into Configuration Manager, click the Admin tab, and
1. Log into Configuration Manager, click the Admin tab, and
then click
!$
"
in the task bar.
The Diagnostics page displays.
Figure 80. Diagnostics Page
2. From the WAN Interface drop-down list, select the name of
the WAN interface you want to test.
3. Click
.
The diagnostics utility runs a series of test to check whether the
device's connections are up and working. This takes only a few
seconds and the results for each test are displayed on screen
(Pass, Fail, or Skipped). A test may be skipped if the program
determines that no suitable interface is configured on which to run
the test.
You can click
You can click
'
to display an explanation of each test. Work with
your ISP to interpret the results of the diagnostic tests.