Polaris 140 Benutzerhandbuch

www.polarispool.com

If the Polaris cleaner displays the following
actions, adjustments may be necessary to
restore performance. Refer to the exploded
parts diagram for part numbers indicated 
in parentheses.

Solution:

1. Using flow indicator (#24),

verify proper water flow to
cleaner. Adjust to high end of
target range.

2. Reposition eyeball fittings on

return lines so flow moves
hose and cleaner away 
from obstacles.

3. Reposition deflector ring or

add another deflector ring
(part #8-6052) if multiple
obstacles exist.

4. Rotate the steering skirt (#15)

to opposite side of cleaner.

5. Verify that hose is adjusted 

to the proper length and 
hose weights (#23) are 
positioned correctly.

6. Remove unnecessary pool

hardware, or install a Ladder
Guard (part #G21).

Solution:

1. Using the flow indicator (#24),

verify proper flow to cleaner.

2. Clean pool filter and 

pump basket.

3. Turn cleaner upside down,

clear debris from ball valve
chamber and bypass intake.

4. Check shoe (#17) and ball

valve seat (#11) for signs of
wear. Replace if necessary.

5. Remove bypass intake to

check bypass disk (#13) and

o-ring (#2) for damage or
excessive wear. Replace 
if necessary.

Solution:

1. Using flow indicator (#24),

verify proper water flow to
cleaner.

2. Turn cleaner upside down,

clear debris from ball valve
chamber and bypass intake.

3. Check shoe (#17) and ball

valve seat (#11) for signs of
wear. Replace if necessary.

4. Remove bypass intake to

check bypass disk (#13) and
o-ring (#2) for damage or
excessive wear. Replace if
necessary.

Solution:

1. Using flow indicator (#24),

verify proper water flow to
cleaner. Adjust flow to the
lower end of target range.

2. Verify the flow regulator (#19)

is clear of debris.

3. Position hose weight (#23)

farther away from cleaner or
add additional hose weight.