Phonetics 1104 Benutzerhandbuch

3.

Connect the Model 1104 to a telephone line.

When these steps are completed, the Model 1104 is fully
operational and able to monitor temperature, high sound, AC
power failure and battery backup condition; it can also be called
on the telephone for a Status Report or used for listening to on-
site sounds from any remote location. Now, the unit is ready for
programming.

The Model 1104 will scan the 4 external inputs and determine if
they are N.O. (normally open), N.C. (normally closed), or
Temperature. If external sensors are added, make sure they are in
their normal positions before proceeding—refer to Chapter 5,
Section 5.1.

1.

Press STANDBY to place the Model 1104 in Standby 
mode.

2.
If

you have external sensors available, wire the sensors to the
inputs on the back of the Model 1104 (see Chapter 2, 
Section 2.10). Otherwise, skip this step and move to step 3.

3.

Press RUN. The red light glows when the Model 1104 returns
to Run mode.

4.

Press SET.  

5.

SET

#