Perfect Flame 720-0522 Benutzerhandbuch
Fig. 17
15. Battery Installation
Unscrew the ignition button housing (A); insert the
battery from pack G into the housing with the
positive terminal (+) facing outward (B). Replace the
ignition button housing after the battery has been
installed as shown in fig. 17.
battery from pack G into the housing with the
positive terminal (+) facing outward (B). Replace the
ignition button housing after the battery has been
installed as shown in fig. 17.
T M
TM
TM
B
A
16. Lighting Rod Installation
Remove the lighting rod and one 5/32-in. x15-mm
ladder bolt from pack E and F. Open the right door
(A) and insert the ladder screw with the lighting rod
into the hole in the door. Tighten the ladder screw
until it locks the lighting rod into place as shown in
fig. 18.
ladder bolt from pack E and F. Open the right door
(A) and insert the ladder screw with the lighting rod
into the hole in the door. Tighten the ladder screw
until it locks the lighting rod into place as shown in
fig. 18.
17. Liquid Propane Tank Installation
Place the liquid propane tank into the hole in the
bottom panel and lower the tank holder onto the
liquid propane tank as shown in fig. 19.
bottom panel and lower the tank holder onto the
liquid propane tank as shown in fig. 19.
A
Fig. 18
A
Fig. 19
14