Troy-Bilt 24A-070F768 Benutzerhandbuch

1.  a. Unhook bag straps from the lower handle.
   b. Unsnap bag clip from the top of lower handle. See 

Figure 10.

  c.  Grasp bag handle with one hand and pull lock rod 

on mounting bracket with other hand toward engine 
to release.

  d. Lift bag off back of unit.
2.  Twist the two buttons on the back of the bag to unlock 

and empty contents. See Figure 11. Hold bag handle 
and bag clip while emptying the contents.

3.  Compress bag opening and fold inner flap over 

opening.

4.  Fold outer flap over inner flap and insert buttons on 

the bag through metal outlets. See Figure 11.

5.  Twist the buttons to lock bag. Place bag back onto unit 

as instructed on page 8.

1.  Grasp blower chute with one hand and pull lock rod 

on mounting bracket with other hand toward engine to 
release. Refer to Figure 8 on page 9.

2.  Remove blower chute from rim of the discharge 

opening.

1.  Place nozzle/hose vac lever in the top position on the 

nozzle to vacuum through nozzle. See Figure 12.

2.  The spring loaded pin must be in the first hole (closest 

to the end of the tube) of the hose adapter to operate 
the nozzle vac.

3.  Place both hands on top of the upper handle and fully 

lift the drive control against the upper handle to propel 
the unit over yard.

4.  Use the speed control to choose either the high or low 

speed. The speed control may be moved either while 
the unit is propelling or before engaging the wheels.

 

IMPORTANT: Move the speed control only when the 
engine is running. Changing the speed control setting 
with the engine off can damage the yard vacuum.

�

�

�

�

����������

������

����

�������

 Move the speed 

control only when the 

engine is running. 

Changing the speed 

control setting with the 

engine off can damage 

the yard vacuum.

�

�