Patton electronic IP Phone SmartNode 4110 Series Benutzerhandbuch

Introduction

SmartWare Software Configuration Guide 

, shows the characteristics of a configuration file. It is stored on a TFTP server in the file myconfig.cfg 

for later download. The command syntax used to enter commands with the CLI and add commands in config-
uration files is identical. For better comprehension, you can add comments in configuration files. To add a line 
with a comment to your configuration file, simply begin the line with the hash (#) character. The command 
parser skips everything after the hash character to the end of the line.

#----------------------------------------------------------------#
# My Configuration File   
#----------------------------------------------------------------#

# SNTP configuration used for time synchronization
cli version 3.00
  sntp-client
  sntp-client server primary 172.16.1.10 port 123 version 4
  sntp-client poll-interval 600
  sntp-client gmt-offset + 01:00:00

# system definitions
system
  clock-source 1 2
  hostname node

# IP context configuration
context ip router
  route 0.0.0.0 0.0.0.0 172.19.32.2 1
  route 172.19.41.0 255.255.255.0 172.19.33.250
  route 172.19.49.0 255.255.255.0 172.19.33.250

# interface LAN used for connection to internal network 
  interface lan
  ipaddress 172.19.33.30 255.255.255.0
  mtu 1500

# interface WAN used for connection to access network
  interface wan
  ipaddress 172.19.32.30 255.255.255.0
  mtu 1500

# CS context configuration
context cs switch
  no shutdown

# routing table configuration
routing-table called-e164 rtab
  route 2.. dest-interface telecom-operator

# interface used to access the PSTN telecom operator
interface isdn telecom-operator
  route call dest-interface h323

# interface used to access the VoIP telecom provider
interface h323 voip-provider
  route call dest-table rtab
  remoteip 172.19.33.60