PASCO Specialty & Mfg. CI-6742 Benutzerhandbuch
012-06757B
Motion Sensor II
3
Figure 3
Mounting the Motion Sensor II onto a Dynamics Cart
Cart
Accessory
Adapter
Accessory
Adapter
Attach the ME-6743
Cart Accessory Adapter
(available separately)
here.
Cart Accessory Adapter
(available separately)
here.
Figure 2
Mounting the Motion Sensor II on a rod stand
Figure 1
Mounting the Motion Sensor II on a Dynamics Track
Slide the Motion
Sensor onto the
end of the
Dynamics Track.
Sensor onto the
end of the
Dynamics Track.
Mounting the Motion Sensor II on PASCO
equipment
equipment
Dynamics Track
Engage the spring
clips of the Motion
Sensor II.
clips of the Motion
Sensor II.
Mounting
screws
screws
Dynamics
Track
Track
6. Open a Graph display in ScienceWorkshop.
7. Start monitoring data.
Note: When the ScienceWorkshop program is
set to monitor or record data, the Motion
Sensor II transducer will be triggered to
produce the ultrasonic pulses that are used by
ScienceWorkshop to determine the location of
the target.
8. Adjust the angle of the transducer, the
Narrow/Std. mode, and the trigger rate as
necessary to achieve the optimal signal.
Note: The LED will light when the Motion
Sensor II acquires the target.
9. You are now ready to record data.