Trek TREK-725 Benutzerhandbuch
5
Chapter 1
1.3 LCD Specifications
Note: The panel PC uses a reliable, high-quality color LCD display.
However, it may contain a few defective pixels which do not always
illuminate. With current technology, it is impossible to completely elimi-
nate defective pixels. Advantech is actively working to improve this
technology.
However, it may contain a few defective pixels which do not always
illuminate. With current technology, it is impossible to completely elimi-
nate defective pixels. Advantech is actively working to improve this
technology.
1.4 Touch screen Specifications
1.5 Power Input Range & Power Consumption
TREK-725 works with a 24 ~ 48V DC power input. The maximum cur-
rent consumption is about 2 A at 24 Vdc. The power consumption is 20
Watts in normal mode (no I/O device and RF modules connected to the
TREK-725 with only WinCE O.S. running) and 15Watts in idle mode
(LCD backlight off).
rent consumption is about 2 A at 24 Vdc. The power consumption is 20
Watts in normal mode (no I/O device and RF modules connected to the
TREK-725 with only WinCE O.S. running) and 15Watts in idle mode
(LCD backlight off).
Table 1.2: LCD Specifications
LCD model
AU G104SN03
Display type
TFT color LCD
Size (Diagonal)
10.4"
Resolution
800 x 600 (VGA)
Maximum colors
262K colors
Pixel pitch (mm)
0.264 (H) x 0.264 (V)
Luminance (cd/m2)
230 cd/m
2
Lamp lifetime
20000 hours
Table 1.3: Touch screen Specifications
Model
DynaPro 95422
Type
Resistive
Base glass construction
Tempered Glass
Resolution
Continuous
Light transmission
75% typical
Durability
1 Million Activations on a single point,
tested by a 5/8" diameter silicone finger
with a 350 g load at 2 Hz.
tested by a 5/8" diameter silicone finger
with a 350 g load at 2 Hz.
> 100,000 characters written within a
20 mm x 20 mm area on the touch
screen.
20 mm x 20 mm area on the touch
screen.