Transition Networks SCSCF30XX-10X Benutzerhandbuch

Seite von 7
* Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network.
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
SCSCF3011-100
75 ohm coax (BNC)
ST, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3013-100
75 ohm coax (BNC)
SC, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3014-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
20 km (12.4 miles)*
SCSCF3015-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
40 km (24.8 miles)*
SCSCF3016-100
75 ohm coax (BNC)
SC, 1310 nm singlemode
60 km (37.3 miles)*
SCSCF3017-100
75 ohm coax (BNC)
SC, 1550 nm singlemode
80 km (49.7 miles)*
SCSCF3018-100
75 ohm coax (BNC)
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
SCSCF3019-100
75 ohm coax (BNC)
LC, 1310 nm single mode          
20 km (12.4 miles)*
SCSCF3029-100
75 ohm coax (BNC)
SC, 1310 mn (TX)/1550 nm (RX)
20 km (12.4 miles)*
SCSCF3029-101
75 ohm coax (BNC)
SC, 1550 mn (TX)/1310 nm (RX)
20 km (12.4 miles)*
SCSCF3029-100 and -101 are intended to be installed in the same network where
one is the local converter and the other is the remote converter.
User’s Guide
SCSCF30xx-10x
Stand-Alone Device
DS3 or T3 / E3
Coax (BNC) to Fiber
Transition Networks SCSCF30xx-10x series
Devices encode and decode DS3 or E3 coax
copper signals over fiber optic cable to extend
the distance and transmission reliability of high-
speed DS3 or E3 data traffic.  The SCSCF30xx-
10x also connects remote locations via T3/E3
cable.
Note:  The CCSCF30xx-10x model is the
chassis version of the Device.   For more
information, see the CCSCF30xx-10x user’s
guide on-line at www.transition.com.
Installation  . . . . . . . . . . . . . . . . . . . . .2
Operation  . . . . . . . . . . . . . . . . . . . . . .6
Cable Specifications  . . . . . . . . . . . . . .7
Technical Specifications  . . . . . . . . . . .8
Troubleshooting  . . . . . . . . . . . . . . . . .9
Compliance Information  . . . . . . . . .12