Panasonic Arbitrator 360 Bedienungsanleitung

108

109

*

1  The  [REC]  lamp  normally  blinks  under  the  following 

conditions:

    •  When there is little space left (about 0 minutes or less) 

on an SDHC Memory Card

    •  When  the  number  of  files  recorded  on  each  SDHC 

Memory Card inserted in slots 1, , , and 4 totals over 

5,000 files

*

  For  details  on  how  to  run  the  Front-End  or  Back-End 

application,  refer  to  the  operating  instructions  supplied 

with the  Front-End or Back-End application.

*

  If the error is related to the status of the SDHC Memory 

Card,  the  status  will  appear  in  the  status  display  of  the 

Overlay  OSD.  Refer  to  “Viewing  Live  Video  →  Viewing 

the  status  of  the  recorder”  on  page  55,  or  contact  your 

supplier.

•  If  pressing  the  [REC]  button  or  entering  a  recording 

trigger fails to start recording, the [REC] lamp blinks at a 

high rate.

•    The  [BUSY]  lamp  blinks  when  accessing  the  SDHC 

Memory  Card  immediately  after  opening  or  closing  the 

recorder’s SDHC Memory Card slot cover.

This table shows the relationship between lamp Lit/Unlit/blinking states and the recorder’s operating status.

 : Lit     : Normal blinking    : Unlit    : Fast blinking (about three times/sec)

 : Blinking consisting of short off intervals combined with long on intervals

 : Blinking consisting of short on intervals combined with long off intervals

Status immediately after power-on
Recorder booting, Front-End and Back-End applications running
Live video display
Normal recording

*

1

, Loop recording

Intermittent recording

*

1

•  Post-recording

•  Including Front-End and Back-End application operation

*



Restoring automatically

Administrator setting screen display with recording stopped

(accessing SDHC Memory Card), formatting, deleting a file
Administrator setting screen display with recording stopped

(not accessing SDHC Memory Card)
Playing, exporting, uploading
•  Terminating operation

•  SDHC Memory Card start processing (recognition when inserted)

•  SDHC Memory Card shutdown processing (when a SDHC Memory Card slot 

cover is opened)

The SDHC Memory Card slot cover is opened.
Updating recorder firmware
•  Updating microprocessors on the recorder and Remote Control Panel

•  Copying menu settings
Successfully copied the menu settings
Failed to copy menu settings

     ,     or    

An error involving recording operations occurred during live screen display

*



Starting upgrading
Finishing upgrading
Failed in upgrading
•  No SDHC Memory Card is inserted, or it is not recognized  

•  No more SDHC Memory Card space available  

•  The write-protect switch of the SDHC Memory Card is set to “LOCK”

•  An unformatted card

Playback with the remote control panel is not available 

at present. Upgrading is scheduled for the future. 

For playback, it is recommended to use the Front-End 

application or Back-End Client application.