Panasonic Arbitrator 360 Bedienungsanleitung
58
59
RETURN
MENU
CONTROL PANEL
ON/
OFF
Recording
REC button
STOP button
BOOK MARK button
Starting and stopping recording
Starting recording
Press the [REC] button.
This starts video and sound recording.
The live screen appears automatically if not already on. The
Remote Control Panel, the Color Camera and the Memory
Card Recorder [REC] lamps go on during recording.
Note:
Note:
The Color Camera [REC] lamp goes on regardless of camera
input setting.
There are also other methods for starting recording. For
There are also other methods for starting recording. For
details, refer to “Starting Recording” on page 8.
Stopping recording
Press the [STOP] button ( ).
Pressing the [STOP] button turns off the [REC] lamp and
video and sound recordings stop when the post record
*
1
interval has elapsed. Then the [BUSY] lamp goes off.
Notes:
Notes:
When recording is stopped under the conditions in which
Classify information is registered (see page 89), Classify
on the Management Mode screen is set to “ENABLE” or
“FORCE” (see page 89), and Loop Rec on the Rec/Play
screen is set to “OFF” (see page 81), the Classify selection
screen
Classify information is registered (see page 89), Classify
on the Management Mode screen is set to “ENABLE” or
“FORCE” (see page 89), and Loop Rec on the Rec/Play
screen is set to “OFF” (see page 81), the Classify selection
screen
appears.
Select the classify information with the [ , ] buttons and
press the [BOOK MARK] or [RETURN] button. The
classify information will be added to the file.
In the following cases, the Classify screen disappears and
the classify information cannot be added.
the classify information cannot be added.
•
•
- When automatic uploading has started
- When automatic restoring has started
- When the CONTROL PANEL button is set to OFF
- When a fatal error has occurred
- When the SDHC Memory Card slot cover is open
- When the unit is in ACC-OFF mode
There are also other conditions for stopping recording.
For details, see “Stopping Recording” on page 9.
Adding bookmarks
A bookmark can be added to a file that is being recorded
to mark it for playback. (See “Moving back to a previous
skip location to start playback” and “Moving to the next skip
Press the [BOOK MARK] button.
The bookmark icon appears for 1 or 2 seconds.
Notes:
Notes:
The bookmark icon appears on the overlay OSD. When
[Overlay OSD] is “OFF” (see “Viewing the status of the
does not appear.
Bookmarks can be added with a minimum interval of 2
seconds.
A bookmark cannot be entered until about 2 seconds after
recording starts.
It is possible to move the playback location to the
bookmark during playback.
Bookmarks can be added also during playback.
(See “Adding bookmarks” on page 66.)
Bookmarks but not classify tags can be added during
recording.
Classify tags can be added only during playback.
(See “Adding bookmarks” on page 66.)
seconds.
A bookmark cannot be entered until about 2 seconds after
recording starts.
It is possible to move the playback location to the
bookmark during playback.
Bookmarks can be added also during playback.
(See “Adding bookmarks” on page 66.)
Bookmarks but not classify tags can be added during
recording.
Classify tags can be added only during playback.
(See “Adding bookmarks” on page 66.)
•
•
•
•
•
•
•
*
1
Post record is the capability of including material from an interval
after the specified stop point in recording. The interval is set by
an administrator.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.