Panasonic Arbitrator 360 Bedienungsanleitung

Seite von 135
77
When a Front-End application is running or the Back-End 
application is streaming a picture, the recorder freezes in 
the live screen and disables Administrator Setup.
The setup of the recorder includes items that only an 
administrator is allowed to set up.
Notes:
Starting up a Front-End application or streaming on the 
Back-End application during Administrator Setup aborts 
Administrator Setup. The recorder will then freeze in the 
live screen and disable Administrator Setup. 
Starting Administrator Setup from a Front-End or Back-
End application causes the following screen transitions.
  The “Under admin setup from PC…” standby screen 
replaces the live screen. 
  The live screen reappears when the Front-End or Back-
End application completes Administrator Setup.
Logging in the Setup/Admin screen
1.  Use a computer to copy the administrator’s 
officer data to a USB memory device.
For details on creating a text file with the administrator’s 
officer data, refer to “Text Files Used with the Recorder” 
2.  Connect the USB memory device to the 
recorder.
3. Press the [MENU] button.
The Menu appears.
Administrator Setup
RETURN
MENU
CONTROL PANEL
ON/
OFF
Cursor button
MENU button
4.  Press the [ ] buttons to select [Setup/Info] 
and press the [
] button to confirm the entry.
Confirm
Select
Note:
Some USB memory devices may not be properly 
recognized.
5.  Press the [ ] buttons to select [Admin] and 
press the [
] button to confirm the entry.
Confirm
Select
The first of the files automatically sorted (in ascending 
order) from the USB memory device is loaded as the 
administrator’s officer data.
If the Front-End application or Back-End application 
is running, the message shown below appears, and 
Administrator Setup is disabled.
(Continued on the next page)