Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. Arbitrator 360
  5. Bedienungsanleitung

Panasonic Arbitrator 360 Bedienungsanleitung

Download
Seite von 135
92
93
Administrator Setup 
(continued)
Network
IP Address
Use this function to set IP address.
  Interface
Select an interface to be used.
PC LAN 
 
:  Wired LAN for connecting the 
Front-End application and the 
recorder
UPLOAD LAN 
:  Wired LAN for connecting the 
Back-End application and the 
recorder
USB WIRELESS LAN :  USB Wireless LAN for 
connecting the Back-End 
application and the recorder
  DHCP
Use this function to set DHCP.
• When  “PC LAN” is selected for [Interface]
If [DHCP] is set to “Server1”, “Server2”, “Server3”, or 
“Server4”, the recorder is set to the DHCP server and the 
Front-End application is set to the DHCP client. In this case, 
the IP address is fixed.
If [DHCP] is set to “OFF”, IP Address, Subnet Mask, and 
Gateway can be set with the procedures described below.
1.  Press the [ , ] buttons to select [Interface].
Select
2.  Press the [ , ] buttons to select [PC LAN].
Select
3.  Press the [ , ] buttons to select [DHCP].
Select
4.  Press the [ , ] buttons to select [OFF].
Select
5.  Press the [ , ] buttons to select [IP Address].
Select
6.  Press the [ ] button.
Select
7.  Enter the address.
Select a character to be entered with the cursor button, 
and press the [
] button.
To delete a entered character: Select [DELETE] with 
the cursor button, and press the [
] button.
To change displayed characters: Select [SHIFT] with 
the cursor button, and press the [
] button.
8.  When all characters have been entered, select 
[SET] with the cursor button, and press the  
[
] button.
Set Subnet Mask and Gateway in the same way.
• When  “UPLOAD LAN” is selected for [Interface]
If the network includes a DHCP server, set [DHCP] to “Client”. 
The recorder is set to the DHCP client, and obtains the IP 
address from the server.
If the network does not include a DHCP server, set [DHCP] 
to “OFF”. The IP address is fixed.
• When USB WIRELESS LAN is selected for [Interface]
If the network includes a DHCP server, set [DHCP] to “Client”. 
The recorder is set to the DHCP client, and obtains the IP 
address from the server.
If the network does not include a DHCP server, set [DHCP] 
to “OFF”. The IP address is fixed.
Updating network setting
When network settings are changed, press the [Set] button.
The network setting will be updated.