Teledyne Camera Accessories T100 Benutzerhandbuch

1.  Plug your anti-ESD wrist strap into the grounded receptacle of the work station before 

touching any items on the work station and while standing at least a foot or so away.  
This will allow any charges you are carrying to bleed away through the ground 
connection of the workstation and prevent discharges due to field effects and 
induction from occurring. 

2.  Pause for a second or two to allow any static charges to bleed away. 

3.  Only after you have plugged your wrist strap into the workstation and allowed static 

charges to bleed away, open any anti-ESD storage bins or bags containing sensitive 
devices or assemblies, as follows: 

  Lay the bag or bin on the workbench surface. 
  Before opening the container, wait several seconds for any static charges on the 

outside surface of the container to be bled away by the workstation’s grounded 
protective mat. 

4.  Do not pick up tools that may be carrying static charges while also touching or 

holding an ESD Sensitive Device. 

  Only lay tools or ESD-sensitive devices and assemblies on the conductive surface of 

your workstation.  Never lay them down on any non-ESD preventative surface. 

5.  Before unplugging your wrist strap, place any static sensitive devices or assemblies 

in anti-static storage bags or bins and close the bag or bin. 

6.  Disconnecting your wrist strap is always the last action taken before leaving the 

workbench. 

When transferring a sensitive device from an installed Teledyne API analyzer to an Anti-
ESD workbench or back: 

1.  Follow the instructions listed above for working at the instrument rack and 

workstation. 

2.  Never carry the component or assembly without placing it in an anti-ESD bag or bin. 

3.  Before using the bag or container allow any surface charges on it to dissipate: 

  If you are at the instrument rack, hold the bag in one hand while your wrist strap is 

connected to a ground point. 

  If you are at an anti-ESD workbench, lay the container down on the conductive work 

surface while your wrist strap is connected to a ground point. 

  In either case wait several seconds. 

4.  Place the item in the container. 

5.  Seal the container.  If using a bag, fold the end over and fasten it with anti-ESD tape. 

  Folding the open end over isolates the component(s) inside from the effects of static 

fields. 

  Leaving the bag open or simply stapling it shut without folding it closed prevents the 

bag from forming a complete protective envelope around the device. 

6.  Once you have arrived at your destination, allow any surface charges that may have 

built up on the bag or bin during travel to dissipate: 

06807C DCN6650