T+A Elektroakustik PT 820 M Benutzerhandbuch
48
Connections on the PT 820 M
GND (Earth connection)
Earth connection for analogue disc players (if a phono
module is fitted).
module is fitted).
AUX ( PH ) INPUT
Universal pre-amplifier input; can be converted into a
Phono input for analogue disc players by installing an
optional MM or MC phono module.
Phono input for analogue disc players by installing an
optional MM or MC phono module.
With MM phono module fitted:
Input socket for disc players fitted with a Moving Magnet
(magnetic) pick-up system.
(magnetic) pick-up system.
With MC phono module fitted:
Input socket for disc players fitted with a Moving Coil
pick-up system.
pick-up system.
Note:
The phono module can be adjusted accurately to the
specification of your pick-up by means of code switches
on the circuit board. The calibration process is described
in the instructions supplied with the phono module.
The phono module can be adjusted accurately to the
specification of your pick-up by means of code switches
on the circuit board. The calibration process is described
in the instructions supplied with the phono module.
TV
Input for stereo TV set.
CD / DVD INPUT
Input socket for connecting the CD 820 M system CD
player or DVD 820 M DVD player.
player or DVD 820 M DVD player.
IN / OUT TAPE 1
Input / output sockets for connecting the CC 820 M cas-
sette recorder.
sette recorder.
IN / OUT TAPE 2
Input / output sockets for connecting a second machine
with record / playback facilities (recorder).
with record / playback facilities (recorder).
When you connect a recorder, the recorder’s INPUT
sockets must be connected to the OUT sockets on the
PT 820 M, and the recorder’s OUTPUT sockets must be
connected to the IN sockets on the PT 820 M.
sockets must be connected to the OUT sockets on the
PT 820 M, and the recorder’s OUTPUT sockets must be
connected to the IN sockets on the PT 820 M.
LINE OUT
Pre-amplifier output. It is designed to be connected to
the LINE IN input sockets of the PA 820 M power
amplifier.
the LINE IN input sockets of the PA 820 M power
amplifier.
If your system includes a DD 820 M surround decoder,
these inputs should be connected to the PT ↓
these inputs should be connected to the PT ↓
↓
↓
↓ sockets on
the DD 820 M (see wiring diagram in the DD 820 M
operating instructions).
operating instructions).
FM ANT - Aerial input
The PT 820 M features a 75 Ω aerial input marked
FM ANT, which is suitable both for standard domestic
aerials and also for cable connections.
FM ANT, which is suitable both for standard domestic
aerials and also for cable connections.
The PT 820 M is supplied with a right-angled aerial plug
for connecting the aerial system.
for connecting the aerial system.
Note:
The simple wire aerial supplied is only an emergency
item, and is not capable of delivering high-quality recep-
tion. We always recommend that you connect the
machine to a permanently mounted domestic aerial or
cable aerial system.
The simple wire aerial supplied is only an emergency
item, and is not capable of delivering high-quality recep-
tion. We always recommend that you connect the
machine to a permanently mounted domestic aerial or
cable aerial system.
RC IN (E 2000)
Input socket for a supplementary E 2000 RC receiver,
which is available as an optional accessory.
which is available as an optional accessory.
An additional remote control receiver is required if you
wish to control the system from an adjacent room, or if
the system is set up in a concealed location.
wish to control the system from an adjacent room, or if
the system is set up in a concealed location.
M
LINK
Socket for the M
LINK
lead: the central control and power
supply bus for all
M-system components.