Osburn Stoves by SB I HYBRID-45 MF Benutzerhandbuch

Thank you for purchasing the HYBRID-45 MF pellet stove. You are now prepared to burn 

wood in the most efficient, convenient way possible. To achieve the safest, most efficient and 

most enjoyable performance from your stove, you must do three things: 1) Install it properly; 

2) Operate it correctly; and 3) Maintain it regularly. The purpose of this manual is to help you 

do all three. 

 
PLEASE read this entire manual before installation and use of this pellet fuel-burning 
room heater. Failure to follow these instructions could result in property damage, 
bodily injury or even death. 
 
Keep this manual handy for future reference. 
 
You Osburn Hydbrid-45MF has been independently tested to ASTM E1509-95 Standard 
Specification for Room Heaters, Pellet Fuel Burning Type 1, UL 1482-1998 Standard for Solid 
Fuel Room Heaters, Oregon Administrative Rules for Mobile Homes (814-23-900 through 
814-23-909) and Installation as a Stove Heater. 
 
This pellet stove, when installed, must be electrically grounded in accordance with local 
codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 
and 

 

 
This appliance is designed specifically for use only with pelletized wood. It is designed for 
residential installation according to current national and local building codes as a freestanding 
room heater. It is also approved as a mobile home heater which is designed for connection to 
an outside combustion air source. 
 
The stove will not operate using natural draft or without a power source for the blower 
systems and fuel feed system and must not be burned with any type of coal. 
 
This stove is designed to provide the optimum proportions of fuel and air to the fire in order to 
burn free of smoke and soot. Any blockage of the air supply to or from the stove will seriously 
degrade its performance and will be evidenced by a smoking exhaust and a sooting window. 
For best operation, the ash content of the pellet fuel should be less than 1% and the calorific 
value approximately 8,200 BTU/LB. Avoid high ash content fuels because this will rapidly fill 
up the burn pot and eventually cut off the combustion air supply. 
 
Commercial and industrial installations of the Osburn Hybrid-45 MF should not be used since 
operational control is often not well managed in these settings.

To receive full warranty coverage, you will 

need to show evidence of the date you 

purchased your stove. Keep your sales 

invoice.  We also recommend that you 

register your warranty online at 

www.osburn-mfg.com  Registering your 

warranty online will help us track rapidly 

the information we need on your stove.