Oracle Server E10293-02 Benutzerhandbuch
Testing an Application
Building a SIP Servlet Application 5-9
Testing a Third Party Call Control Servlet
To test an application, open a Web browser and navigate to the URL of the application
on the OCMS server.
on the OCMS server.
For example, to test the Third Party Call Control servlet perform the following steps:
1.
Navigate to the following URL http://localhost:8888/tpcc (
).
2.
Enter two SIP addresses.
If you have a PSTN Gateway, you can call a PSTN telephone, by entering the full
number with the PSTN gateway address. For example,
sip:16505555555@<ip-address-of-gateway>
number with the PSTN gateway address. For example,
sip:16505555555@<ip-address-of-gateway>
3.
Click Connect.
The call is connected. Invitation 1 (the invitation to the first address/number) is
sent first. Invitation 2 is sent after a short delay. Verify that the communication is
successfully established.
sent first. Invitation 2 is sent after a short delay. Verify that the communication is
successfully established.
Figure 5–4 Using Click-to-Call (Third-Party Call Control)
Note:
Even if a SIP servlet fails to startup the server will display that
it is started. You must view the log file to verify whether the SIP
servlet deployed successfully.
servlet deployed successfully.