Optimus - Katadyn Products Inc. 111 Benutzerhandbuch

Seite von 40
29
IMMEDIATE RECORDING
Recording a Program 
as You Watch It
Follow these steps to record a program as you
watch it. If you know how long the program is,
you can set how long the VCR records.
Note: If you are watching the program on a TV/
monitor that is connected to the VCR’s 
AUDIO/
VIDEO OUT
 jacks, set the TV/monitor to the vid-
eo mode and skip Steps 2 and 3.
1. Turn on the VCR and the TV.
2. Set the TV’s tuner to the same channel as
the VCR’s 
3 CH. 4
 switch.
3. Press 
TV/VCR
 until the VCR displays VCR.
4. Insert a blank cassette, or one that you
want to record over, into the VCR.
5. Press 
SPEED
 on the remote control until
the TV displays the desired recording
speed (
SP
LP
, or 
EP
).
6. Select the signal to record (see “Selecting
the Signal to Record” on Page  28).
7. (Model 61 only) Set the audio recording
mode to the desired setting. See “Receiv-
ing/Recording Stereo/SAP Broadcasts
(Model 61 Only)” on Page  28.
8. Press 
REC/TIME
 on the remote control, or
REC/TIME
 and 
PLAY
  at  the  same  time  on
the VCR. The VCR starts to record and the
TV screen shows 
TO
 
SET
 
SPECIFIC
REC
 
TIME
 
PLEASE
 
PUSH
 
REC
 
KEY
Note: To record without a set duration, just
skip Step 9. The VCR begins to record.
9. Press 
REC/TIME
 again. The TV displays
the recording length. Repeatedly press
REC/TIME
 to advance the timer to the
desired recording length. The recording
length advances in 30-minute increments
up to 2 hours, then 1-hour increments up to
4 hours. 
Notes:
• To ensure that you record all the desired
program, set the recording length longer
than the program length.
• To display the remaining recording time,
press 
DISPLAY
 during a timed recording.
• To temporarily stop the tape during a
recording, press 
PAUSE/STILL
. Press
PAUSE/STILL
 again to resume recording.
If you leave the VCR paused for 3 min-
utes, the VCR automatically stops.
• If the cassette’s erase protection tab has
been removed, the screen shows
CHECK
 
CASSETTE
 
RECORD
 
TAB
 and
ejects the cassette. Use another cas-
sette, or place a piece of heavy plastic
tape over the erase protection tab hole.
10. Press 
STOP
 to stop recording before the
set time.
Recording One Program While You 
Watch Another
1. Follow Steps 1–9 of “Recording a Program
as You Watch It.”
2. Press 
TV/VCR
 until VCR disappears from
the VCR’s display.
Note: If you are watching the program on a
TV/monitor that is connected to the VCR’s
AUDIO/VIDEO OUT
 jacks, set the TV/moni-
tor to the TV mode.
3. Set the TV tuner to the channel you want to
watch.
4. Press 
STOP
 to stop recording before the
set time.
16-548.fm  Page 29  Tuesday, July 20, 1999  4:54 PM