OK International TECHCON SYSTEMS TS250 Datenbogen

Seite von 17
 
 Techcon 
Systems 
TS250 / 255 
Precision Dispensers
 
 
 
 
 
User Guide 
English, German, French, Italian and Spanish version
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Copyright © OK International 
 
TS250 / 255 
 
Präzsions-Dosiergeräte  
 
 
Benutzerhandbuch
 
 
TS250 / 255 
 
Doseurs de  
précision 
Guide de  
l'utilisateur 
 
TS250 / 255 
 
Dosatore di  
precisione 
 
 
 
Manuale dell’utente
 
 
TS250 / 255 
 
Dosificadores de 
precisión 
Guía del usuario
 
 
2
CONTENTS 
Page Number 
 
1.  Safety ……………………………………………………………2 
2.  Symbol Definitions 
…………………………………………………3 
3.  Specifications ……………………………………………….…………...3 
4.  Features ……………………………………………………………4 
5.  Connecting the Unit 
……………………….…….………..…………5 
6.  Setup Instructions 
…………………………………………………5  
7.  Troubleshooting …………………………………………………6 
8.  Maintenance ……………………………………………………………7 
9.  Spare Parts and Accessories 
………………………………………7 
10.  Warranty ……………………………………………………………7 
11.  I/O Configuration and End of Cycle Switch  ……………………….…...7 
 
SAFETY 
 
1.1  Intended Use: 
 
WARNING: Use of this equipment in ways other than those described in this User 
Guide may result in injury to persons or damage to property. Use this equipment 
only as described in this User Guide. 
 
OK International cannot be responsible for injuries or damages resulting from 
unintended applications of its equipment.  Unintended uses may result form taking 
the following actions: 
•  Making changes to equipment that has not been recommended in the User 
Guide 
•  Using incompatible or damaged replacement partsUsing unapproved 
accessories or auxiliary equipment 
 
1.2  Safety Precautions: 
•  Do not operate this unit in excess of maximum ratings/settings 
•  Always wear appropriate personal protective clothing or apparel 
•  Use only the following power adaptor models: PSA15R-240P(ZJ) or 
PW118RA2403B01, PW118RA2403H01, PW118RA2403M01, 
PW118RA2403G01 
•  Care must be taken to prevent the ingress of corrosive or flammable fluid back 
into the unit.  If corrosive or flammable fluids are used, an inline filter (881-
000-000), not included, must be installed on the dispenser to help prevent the 
fluids from being sucked back into the unit 
•  The fluid being dispensed may be toxic and/or hazardous.  Refer to Material 
Safety Data Sheet for proper handling and safety precautions 
•  If a piston is not used with the barrel, an inline filter (881-000-000), not 
included, and must be installed on the receiver head to help prevent fluids from