Norton Abrasives Paper Shredder 8 Benutzerhandbuch
Norton PartitionMagic
9
If you run out of space on the first rescue disk as a result of adding network, SCSI, or
CD-ROM drivers to your boot sequence, you can delete the following files from the disk:
chkdsk.com, fdisk.exe, ptedit.exe, and partinfo.exe. We recommend that you delete the
files in that order, freeing up only the space that you need to accommodate additional files.
These files are included in the Utilities folder on the PartitionMagic CD where you can
access them later, if necessary.
CD-ROM drivers to your boot sequence, you can delete the following files from the disk:
chkdsk.com, fdisk.exe, ptedit.exe, and partinfo.exe. We recommend that you delete the
files in that order, freeing up only the space that you need to accommodate additional files.
These files are included in the Utilities folder on the PartitionMagic CD where you can
access them later, if necessary.
If you use an international keyboard or character set, you will need to modify the
AUTOEXE2.BAT and CONFIG.SYS files on the rescue disks. Refer to “Using
International Keyboards” on page 23 for additional information.
AUTOEXE2.BAT and CONFIG.SYS files on the rescue disks. Refer to “Using
International Keyboards” on page 23 for additional information.
Checking an NTFS partition with the rescue disk version of PartitionMagic may take an
unusually long time. Since PartitionMagic performs checks both before and after the
move, copy, and resize operations, these operations may be slower with the rescue disk
version of PartitionMagic than with the Windows version.
unusually long time. Since PartitionMagic performs checks both before and after the
move, copy, and resize operations, these operations may be slower with the rescue disk
version of PartitionMagic than with the Windows version.
Command Line Switches
The following command line options are supported by the Windows version and the DOS
(rescue disk) version of PartitionMagic, unless noted otherwise. When you specify
multiple options, the order is unimportant.
(rescue disk) version of PartitionMagic, unless noted otherwise. When you specify
multiple options, the order is unimportant.
Switch
Description
/?
Lists all the command line options switches for the version of
PartitionMagic you are running.
PartitionMagic you are running.
/CAS
Copies all sectors within partitions.
/CBS
Checks for all bad sectors.
/CEC
Checks for extra cylinders.
/DBG
Enables debug messages.
/IFC
Ignores file system checks.
/I24
Ignores the 1024 cylinder boundary.
/MUP
Allows you to move partitions of unknown types.
/NBS
Disables bad sector checking.
/NRB
Instructs PartitionMagic not to reboot after the program exits.