Norton Abrasives Paper Shredder 8 Benutzerhandbuch
Norton PartitionMagic
41
Procedure
1
Resize drive C: smaller by 1.5 GB. For more information, see “Resizing and Moving
Partitions” on page 29.
Partitions” on page 29.
The partition where you want to install Windows NT must begin in the first 2 GB of
the disk, or Windows NT will not be bootable. You may need to move your existing
partition to the end of the disk, then create the Windows NT partition at the beginning
of the disk.
the disk, or Windows NT will not be bootable. You may need to move your existing
partition to the end of the disk, then create the Windows NT partition at the beginning
of the disk.
2
Create a primary partition in the unallocated space using the following information:
Partition Type: Select FAT. Do not select FAT32 unless you are using Windows
2000 or later. Earlier versions do not recognize FAT32 partitions.
2000 or later. Earlier versions do not recognize FAT32 partitions.
Label: Type one, if desired.
Size: Type 1500.
IMPORTANT!
Before performing the next step, make sure you have the Windows
NT installation CD and disks; otherwise, you will not be able to boot
your computer.
NT installation CD and disks; otherwise, you will not be able to boot
your computer.
3
Set the new partition active. For more information, see “Setting an Active Partition”
on page 65.
on page 65.
4
Apply the changes to your system.
IMPORTANT!
Before installing Windows NT, make sure that all partitions start
before the 4 GB mark and end prior to cylinder 1024 (8 GB).
Otherwise, Windows NT will not install and will report that all the
partitions are corrupted. If you cannot resize and move all partitions,
you must obtain updated drivers from Microsoft (see article ID:
Q197667 on the Microsoft web site).
before the 4 GB mark and end prior to cylinder 1024 (8 GB).
Otherwise, Windows NT will not install and will report that all the
partitions are corrupted. If you cannot resize and move all partitions,
you must obtain updated drivers from Microsoft (see article ID:
Q197667 on the Microsoft web site).
5
Reboot the computer using the first Windows NT installation diskette.
6
Complete the Windows NT installation.
Norton technical support does not help install operating systems. See your operating
system documentation for details.
system documentation for details.
7
Add Windows NT to your BootMagic configuration so that each time you start or
restart your computer, you can select the operating system you want to boot. For more
information, see “BootMagic” on page 89.
restart your computer, you can select the operating system you want to boot. For more
information, see “BootMagic” on page 89.