Nortel Networks Circuit Card 311 Benutzerhandbuch
508
NT8D02 and NTDK16 Digital Line cards
The NTDK16 digital line card contains a microprocessor that provides the
following functions:
following functions:
•
self-identification
•
self-test
•
control of card operation
•
status report to the controller
•
maintenance diagnostics
The card also provides:
•
Ability to support Digital sets and the Digital Console M2250
•
Provides a serial link (Card LAN) for status report and maintenance.
•
Supports loop lengths up to 3500 ft. (1.0 km) using 24 AWG wire.
Interface between three DS30X loops and 48 TCM lines. The digital line
card is equipped with 16 identical digital line interfaces. Each interface
provides a multiplexed voice, data, and signaling path to and from a digital
terminal (telephone) over a 2-wire full duplex 512 kHz Time Compression
Multiplexed (TCM) digital link. Each digital telephone and associated
data terminal is assigned a separate Terminal Number (TN) in the system
database, giving a total of 32 addressable units per card. The digital line
card supports Nortel Networks’ Meridian Digital Telephone.
card is equipped with 16 identical digital line interfaces. Each interface
provides a multiplexed voice, data, and signaling path to and from a digital
terminal (telephone) over a 2-wire full duplex 512 kHz Time Compression
Multiplexed (TCM) digital link. Each digital telephone and associated
data terminal is assigned a separate Terminal Number (TN) in the system
database, giving a total of 32 addressable units per card. The digital line
card supports Nortel Networks’ Meridian Digital Telephone.
shows a block
diagram of the major functions contained on the digital line card. Each of
these functions are described on the following pages.
these functions are described on the following pages.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.