Cirkuit Planet IPX-300 Benutzerhandbuch

   Port Num 

Analog Port Number (System Define) 

The caller ID will be sent between the callee and caller and will be 

displayed on SIP device LCD panel for identification. 

Any calls originating from the registered ITSP to IP PBX will go into the 

auto-attendant or direct to the selected user or hunting group. 

  Table 3-11. Trunk Management - FXO Trunk setup description 

 
 
Gateway Trunk 

Gateway Trunk Setting allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If 

the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing 

PSTN calls via external Gateway by this function. 

 

 

Figure 3-15. Gateway Trunk setting 

 

Destination IP Address is the IP address of the destination 

Gateway that owns this phone number. 

Port is port of the destination Gateway use. (Default is 5060) 

Table 3-12. Gateway Trunk setting description 

 
 
Trunk Group 

Trunk Group is defines the leading digit of the call out dialing number through SIP / FXO / Gateway 

Trunks of the same type between two given points. The IP PBX will in according to the leading digit to 

determine to use which SIP or Gateway Trunks for outgoing route. 

 

Figure 3-16. Trunk Group setting - 1 

 

Press “more” to show the Service Provider Number under the group. 

 

24