Network Technologies CAT5 Benutzerhandbuch
14
The Command Mode menu (see Fig. 13) lists all Host Adapters by name and index number. Only 8 Host Adapters are listed on
the screen at a time. To view the other portions of the list, scroll using the arrow keys on the keyboard or use the mouse to click
on the arrows on the scroll bar in the OSD menu. When the Command Mode main menu is first displayed, the first Host Adapter
listed will be the Host Adapter the current user is connected to, followed by the next seven consecutively numbered ports.
(Alternatively the list may be sorted alphabetically- see Settings Menu on page 15 to toggle sort method.) The names of
accessible Host Adapters are displayed with white characters. The access rights for the user logged-in may not include all Host
Adapters. Names of restricted access Host Adapters are displayed in blue.
the screen at a time. To view the other portions of the list, scroll using the arrow keys on the keyboard or use the mouse to click
on the arrows on the scroll bar in the OSD menu. When the Command Mode main menu is first displayed, the first Host Adapter
listed will be the Host Adapter the current user is connected to, followed by the next seven consecutively numbered ports.
(Alternatively the list may be sorted alphabetically- see Settings Menu on page 15 to toggle sort method.) The names of
accessible Host Adapters are displayed with white characters. The access rights for the user logged-in may not include all Host
Adapters. Names of restricted access Host Adapters are displayed in blue.
An arrow to the left of an index number in the list indicates the Host Adapter the user is currently connected to. From left to right,
the columns display the following:
the columns display the following:
• Index Number
• Host Adapter Name
• Type of Host Adapter connected (PS2, SUN, or USB)
• CPU power status (where "p" means ON and " - " means OFF)
Figure 13- Command Mode main menu
The list below describes the command functions available from the keyboard within the OSD mode of control after entering into
Command Mode:
Command Mode:
Function
Keystroke
Select the previous Host Adapter
Up Arrow
Select the next Host Adapter
Down Arrow
Decrements the menu by 1 page (displays the previous 7 Host Adapters)
Page Up
Increments the menu by 1 page (displays the next 7 Host Adapters)
Page Down
Display first 8 Host Adapters and move selection bar to the first
Home
Display last 8 Host Adapters and move selection bar to the last
End
Press to toggle enable/disable Scan Mode
S
Enter Settings Menu
T
Find a Host Adapter (using name, comment, unique ID, index number)
F
Enter Administration Mode
(Administrator only- see page 20)
A
Display info for the selected Host Adapter/User Station
I
Display Command Mode Help Menu
H or F1
Go to - select Host Adapter by index number
G
Search- select Host Adapter by name
R
Commands for submenus
Index Number
Type of Host
Adapter
Adapter
CPU Power
Status
Status
Home
Page Up
Up One
End
Page Down
Down One
Host Adapter Name
Logged-in user
Arrow indicates currently
connected Host Adapter
connected Host Adapter
Mouse
Controls
Controls
Selection Bar
Mouse Cursor
FYI: A red hourglass will appear
near the upper right corner of the
OSD menu to indicate that the
screen is being refreshed. This
will occur after 5 seconds of
keyboard and mouse inactivity..
near the upper right corner of the
OSD menu to indicate that the
screen is being refreshed. This
will occur after 5 seconds of
keyboard and mouse inactivity..